Master Brake Cylinder

Quite a while back a moved over the pedal box from the donor Saab V4, and my plan was first to use the V4 master, but I thought is was to weak, worn out and there is no spareparts anymore. I started then to look on the Internet for a new master for a Fiesta 1.0T 2013. I actually had ordered one, but it was canceled. I put the whole thing aside. When going through all the stuff in the workshop I found the master from my old 900i, quite perfect since it hasen´t ABS (If I now recall correctly).

Anyhow I welded old holes, and drilled new ones for mounting the master. I also made two small reinforcement pieces which i welded on the backside. This acrobat exercise,  welding under the steering column take the price as the most ¤%#&”# so far…