Bodywork fresh up #7

Some grinding and hammering… finished of with some primer from the shelf… three different types… but, dosent matter that much… will media blast body before paint…. but good to cover bare metal and welds before moving…

 

Master Brake Cylinder

Quite a while back a moved over the pedal box from the donor Saab V4, and my plan was first to use the V4 master, but I thought is was to weak, worn out and there is no spareparts anymore. I started then to look on the Internet for a new master for a Fiesta 1.0T 2013. I actually had ordered one, but it was canceled. I put the whole thing aside. When going through all the stuff in the workshop I found the master from my old 900i, quite perfect since it hasen´t ABS (If I now recall correctly).

Anyhow I welded old holes, and drilled new ones for mounting the master. I also made two small reinforcement pieces which i welded on the backside. This acrobat exercise,  welding under the steering column take the price as the most ¤%#&”# so far…